Before The First Use; Loading Salt Into The Softener - KKT KOLBE GS6013ED Benutzerhandbuch

Using the dishwasher
3. Using the dishwasher
3.1 Before first use
• A. Set the water softener
• B. Pour 500ml of water inside the salt container and then fill with
dishwasher salt
• C. Fill the rinse aid dispenser
• D. Fill in detergent
3.2 Loading the salt into the softener
Important
Always use refined salt, which is intended for the dishwasher. If
you take a different kind of salt (in particular table salt), the water
softener is damaged.
• Remove the lower basket and then unscrew and remo-
ve the cap from the salt container.
• If you are filling the container for the first time, fill 2/3 of
its volume with water (around 500ml).
• Place the end of the funnel (supplied) into the hole
and introduce about 2kg of salt. It is normal for a small
amount of water to come out of the salt container.
• Carefully screw the cap back on.
• Usually, the salt warning light will be off in 2-6 hours
after the salt container is filled with salt.
10