KKT KOLBE GS6013ED Benutzerhandbuch Seite 56

Using the dishwasher
The washing program „ECO" is „medium" for the washing of
!
the suitable soiled dishes and most efficient in terms of com-
bined energy and water consumption.
The fair values of the washing program are a guideline only. Cir-
cumstances that are not dependent on the device, for example
the temperature of the supplied water, the water pressure, etc.,
may affect the overall duration of the wash cycle.
* Default program, according to the test cycle.
4.1 Setting up the washing program
Make sure that notes from the first section have been complied
with „before first use".
1. Check the status of the rinse aid and refined salt.
2. Pull out the upper and lower basket and clear up the dishes - see
instructions for loading the dishwasher.
3. Press the lower and upper basket back in place.
4. Fill in the washing detergent.
5. Turn the dishwasher off using the ON/OFF-button.
Wait before pushing the program selection button for 5 seconds,
otherwise it could happen that the consumer is not working
properly.
6. Press the program selector button and select the appropriate pro-
gram in order for the installed harness. The program indicators
show you which wash program you have selected.
7. Select the program you want to use.
8. Close the door firmly until you hear a click of the door lock.
9. After a few seconds you will hear how the machine fills with water
and the wash cycle begins.
20
!