Scalance X005 Tp Ports - Siemens SCALANCE X005 Inbetriebnahmehandbuch

4.4 SCALANCE X005 TP Ports

Connector Pinout
RJ-45 jack
Figure 4-2
Pin number Pinout
Pin 8
Pin 7
Pin 6
Pin 5
Pin 4
Pin 3
Pin 2
Pin 1
On SCALANCE X005, the twisted pair ports are implemented as RJ-45 jacks with MDI-X
assignment (Medium Dependent Interface–Autocrossover) of a network component.
Notice
TP cords or TP-XP cords with a maximum length of 10 m can be connected at the RJ-45 TP
port.
Depending on the cable type, a maximum total cable length of 100 m is permitted between
two devices with the IE FC cables and IE FC RJ-45 plugs 180.
Autonegotiation
Autonegotiation means the automatic detection of the functionality of the port at the opposite
end. Using autonegotiation, repeaters or DTEs can detect the functionality available at the
Industrial Ethernet SCALANCE X005
Commissioning Manual, A2B00051528A
RJ-45 connector pinout
NC
NC
TD-
NC
NC
TD+
RD-
RD+
Product Characteristics
4.4 SCALANCE X005 TP Ports
4-3