IKEA MEDELSTOR Gebrauchsanleitung Seite 12

ENGLISH
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If the drying results are
satisfactory while using multi-tablets only, it
is possible to deactivate the notification for
refilling rinse aid. However, for best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid empty
notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start flashing and the display is blank.
2. Press .
• The indicators
off.
• The indicator
• The display shows the current setting.
– = rinse aid empty notification
activated.
– = rinse aid empty
notification deactivated.
3. Press to change the setting.
4. Press on/off to confirm the setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default, this acoustic signal is activated and
it is possible to deactivate it.
and until
, , and
, and
still flashes.
In addition, an acoustic signal will sound
before the AutoOpen will open the door.
This acoustic signal stops only if AutoOpen
is deactivated.
When pressing the main switch to turn on
the dishwasher, it makes a short beep
sound. The beep is activated by default, but
it is possible to deactivate it together with
the end of programme acoustic signal.
How to deactivate the acoustic signals
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
are
• The display shows the current setting:
–
–
3. Press
4. Press on/off to confirm the setting.
AutoOpen
AutoOpen improves the drying results with
less energy consumption.
and
, ,
.
, and
still flashes.
= Acoustic signal off.
= Acoustic signal on.
to change the setting.
12
until
and
are