10 Multiple handsets
Up to three additional handsets can be logged on to your base station. You can
obtain this additional handset from your AUDIOLINE dealer with the designation
DECT 4801.
Note: Handsets from other manufacturers can also be integrated into the telephone
system by means of the internationally adopted GAP standard. In the same way,
you can use an AUDIOLINE handset on base stations from other manufacturers, as
long as these units work using the GAP standard.
10.1 Logging on and logging off handsets
10.1.1 Logging on DECT4800/4801 handsets
Button
Display
FEATURES
SYSTEM
4 x
REGISTER
BS 1 2 3 4
If the handset is already connected to a base station, the
corresponding numbers will flash.
Number pad
Select the base station on the number pad.
PIN?
Number pad
Enter the PIN Code (factory setting 0 0 0 0).
Press the button on the base station for 2 seconds.
SEARCH BS 1
After a short time the handset will be logged on. The internal
number of the new handset will appear in the display.
10.1.2
Logging on other DECT-GAP telephones to the base station
To log on a DECT-GAP handset, follow the instructions in the other manufacturer's
operating manual and then press the
Use the PIN code 0 0 0 0 for logging on.
- Multiple handsets -
button on the base station for 2 seconds.
111