What To Do If - AEG BP5014321 Benutzerinformation

36 www.aeg.com
Installing the door and the glass panels
A

11. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
B C
Problem
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
(A, B and C) back in the correct se-
quence. The middle panel (B) has a dec-
orative frame. The screen-printing zone
must face the inner side of the door.
Make sure that after the installation the
surface of the glass panel frame (B) on
the screen-printing zones is not rough
when you touch it.
Make sure that you install the top panel
in the seats correctly (refer to the illustra-
tion).
Possible cause
The appliance is deacti-
vated.
The clock is not set.
The necessary settings
are not set.
The automatic switch-off
is on.
The Child Lock is on.
Remedy
Activate the appliance.
Set the clock. Refer to
"Setting the time of
day".
Make sure that the set-
tings are correct.
Refer to "Automatic
switch-off".
Refer to "Deactivating
the Child Lock".