Telescopic Runners - AEG BP5014321 Benutzerinformation

displayed during the next use of the
core temperature sensor.
6. Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
7. When the meat is at the set core
temperature, the symbol for the core
temperature and the core tempera-
ture sensor flash. An acoustic signal
sounds for two minutes. Press a but-
ton or open the appliance door to
stop the signal.
8. Remove the plug of the core tem-
perature sensor from the socket .
Remove the meat from the appli-
ance.
9. Deactivate the appliance.
When the appliance calculates
the provisional duration time for
the first time, the symbol - flashes
in the display. When the calcula-
tion ends, the display shows the
duration of the cooking. Calcula-
tions run in the background dur-
ing the cooking and the duration
value in the display is updated if
necessary.

7.2 Telescopic runners

You can change the core temperature
at any time during the cooking:
1.
Press
– One time - the display shows the
set core temperature which
changes every 10 seconds to the
current core temperature.
– Two times - the display shows the
current oven temperature which
changes every 10 seconds to the
set oven temperature.
– Three times - the display shows
the set oven temperature.
2. Use the knob for the temperature to
change the temperature.
1. Pull out the right and left hand tele-
scopic runners.
°C
ENGLISH
:
13