Faytech 8 Inch Bedienungsanleitung Seite 44

We recommend "None" (see the picture upper right) for the calibration setting. A calibration will
be performed every time your PC starts up if you choose "Every system boot up". If you
choose "Next system boot up" a calibration will be performed on the next system reboot. You
can carry out a calibration at any time after the TouchKit program is installed. (See "Setting up
the faytech Touch software".) After making your selection on this screen, click "Next".
6."TouchKit - InstallShield Wizard":
Connect the USB cable now and press "OK". If the "New Hardware Found" dialog of Windows
opens, please cancel it.
7. "Setup Type":
If you plan to use multiple monitors, please choose this box. (See "Setting up the faytech
Touch software".)
8."Choose Destination Location": Accept the default destination or choose your own then
press "Next".
9. "Select Program Folder": Give the program a name or use the default setting and press
"Next".
10."Setup Status":
44