Faytech 8 Inch Bedienungsanleitung Seite 43

1. Put the CD into your CD- ROM.
2. Use the Explorer on the CD and select the appropriate subdirectory (Touch Driver, then the
right operation system) to open the installation file setup.exe directly. Now you will see the
following window:
Select the Windows driver 2000/XP/Vista/Windows7 in the upper right. If a security warning
pops up, click "Run","Continue" or "Execute". Under Vista you must confirm the UserAccount
Control with "Continue". Some further warnings may be given depending on installed security
programs. Always click the button to continue the operation.
To complete the installation with all default options, click "Next" on each of the following dialog
boxes. You can cancel at any time. To switch back to a previous step, click the "<back" button.
Please note! The installation process is in English. Later on you can choose the language for
the OSD.
3."Welcome to the InstallShield Wizard for TouchKit":Press "Next" if you to continue the
installation.It's advisable to close all other programs before beginning this installation.
4."Setup Type"：
Check the box (see the picture on the next page upper left) only if you want to install the
PS/2-Driver. Usually for a USB-touch display, you should NOT select this option. The
PS/2-Driver works smoothly with a PS / 2 mouse but if you do not have a PS / 2 mouse you
should leave this box unchecked to avoid compatibility problems.
5."Setup Type"
43