Cleaning And Maintenance; Technical Specifications - EuroLite Truss adapter Bedienungsanleitung

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
Observe prescribed testing deadlines:
1. Once a year by an expert
2. Every four years by a skilled person
3. Before every use for breakage and function by the operator
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Max. load WLL (4-fold):
Max. load BGV C1 (8-fold):
Spigot:
Dimensions (LxWxH):
Weight:
Max. load WLL (4-fold):
Max. load BGV C1 (8-fold):
Spigot:
Dimensions (LxWxH):
Weight:
59006830 TAH-200
Max. load: 175 kg
Spigot: D = 35 mm
Weight: 2.5 kg
Max. load WLL (4-fold):
Max. load BGV C1 (8-fold):
Receiver/Spigot:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 02.05.2013 ©
59006810 TPC-52 59007075 STR-3550
1000 kg 700 kg
500 kg 350 kg
D = 28 mm D = 36 mm
200 x 130 x 60 mm 185 x 80 x 95 mm
0.9 kg 0.8 kg
59006820 TAH-52 59006825 TAV-52
180 kg 180 kg
90 kg 90 kg
D = 28 mm D = 28 mm
450 x 80 x 240 mm 140 x 80 x 585 mm
3 kg 3 kg
59006832 TAH-300
250 kg
D = 52 mm
2.5 kg
59007078 TAH-35S
400 kg 300 kg
200 kg 150 kg
D = 36 mm D = 36 mm
250 x 75 x 180 mm 460 x 75 x 225 mm
1 kg 2.4 kg
7/7
59007079 TAH-35M 59007080 TAH-35L
1000 kg
500 kg
D = 54 mm
630 x 70 x 380 mm
5.2 kg
00040258.DOC, Version 2.2