Electrical Connection - Electrolux WA SL2 E 102 Benutzerhandbuch

Water drainage
The end of the drain hose can be posi-
tioned in three ways:
1. Hooked over the edge of a sink us-
ing the plastic hose guide supplied
with the machine.
In this case, make sure the end cannot
come unhooked when the machine is
emptying. This could be done by tying it
Important! The drain hose may be
extended to a maximum of 4 metres. An

ELECTRICAL CONNECTION

Information on the electrical connection is
given on the rating plate on the inner edge
of the appliance door.
Check that your domestic electrical installa-
tion can take the maximum load required, al-
A
2. In a sink drain pipe branch. This
3. Directly into a drain pipe at a height
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the
drain pipe must be larger than the outside
diameter of the drain hose. The drain hose
must not be kinked.
additional drain hose and joining piece is
available from your local Service Centre.
so taking into account any other appliances
in use.
to the tap with a piece of string or attach-
ing it to the wall.
branch must be above the trap so that
the bend is at least 60 cm above the
ground.
of not less than 60 cm and not more
than 90 cm.
Connect the machine to an earthed
socket.
electrolux 55