Inhaltsverzeichnis
Werbung
The keys of the remote control function as the keys of the front panel of the DVR. The only
difference between the remote control and the front panel keys is the "DVR SEL" key. The DVR
Selection key is used to switch control between each DVR.
The remote control can be used to control up to 16 DVRs. To setup the remote control, the first
thing is to assign a unique DVR Unit ID to each DVR.
Use the front panel of the DVR, and follow this path to change the DVR Unit ID, <Main Menu>
<System Setup> <RS485 Setup> <Unit ID>. Change the DVR Unit ID to any number
between 224 and 239, and exit the menu.
The ID Table is listed below for reference.
DVR Unit ID
Remote Control #
DVR Unit ID
Remote Control #
After the DVR Unit ID is changed, setup the "DVR SEL" of the remote control. Press "DVR SEL",
and then press the Remote Control # immediately to select the DVR. For example, assuming the
DVR Unit ID is set to 225, press "DVR SEL" and then press "2" immediately. Now, the remote
control will only be able to control the specified DVR. Press "DVR SEL", and then press the
Remote control # to switch between DVRs.
To exit the single DVR Control mode, press "DVR SEL", and then press "ESC" to do so.
224 225 226 227 228 229 230 231
1
2
3
4
232 233 234 235 236 237 238 239
9
10
11
12
72
5
6
7
8
13
14
15
16
Werbung
Inhaltsverzeichnis
