Safety Rules - Cleanfix S 20 Bedienungsanleitung

Operating instructions
These operating instructions have been made for the operators of the
vacuum cleaner.
1. Please get acquainted with the components, safety instructions and
operation details, maintenance and recommandations mentioned in
these instructions.
2. This allows you to optimise the performance, usage, maintenance and
saftey of the machine and allows you to keep the machine at a perfect
level throughout it's life.
The manufacturer takes no responsability for damages caused to
property or persons due to improper use of the machine!

1. Safety rules

For your own safety
Before using the machine read the instructions thoroughly. The operating
instructions must always available for the operator.
The vacuum cleaner may only be operated by persons who have been fully
trained and authorised to use it.
Warning!
The vacuum cleaner is not suitable for cleaning surfaces, from
which any type of dust or substances which are flammable, poisonous, caustic,
irritating are remove that represent a health hazard.
General
The usage of the vacuum cleaner is subjected to national regulations.
After the operating instructions and the nationales rules for safety in the work
place, we also recommend that the unwritten rules of safe working be
respected.
Proper Operation
•
The vacuum cleaner is only to be operated using a dustbag. The wet and
dry vacuum cleaner must be operated with dustbag for dry vacuuming.
When vacuuming liquids place the insert with float into the tank.
•
All other usage is considered improper. The manufacturer takes no
responsablility for damages due to the improper use of the auto scrubber.
The user takes the entire risk for damages due to improper use.
•
Respecting the operation, maintenance and repairs instructions are also an
important part of the proper operation.
•
The appropriate accident prevention rules, as well as other known
regulations for health and safety in operation, must be respected.
•
Any changes on the vacuum cleaner will result in refusal of the
manufacturer to take any guarantee or responsability for damage that may
occur as a result
2. Explanation of pictures
General view including accessories S20/SW15/SW20
1. Handle
2. Cable holder
3. Socket for external accessory (S20-only)
4. Main switch
5. Connector for hose
6. Latch for securing cover
7. 5 swivel castors
8. Motor housing with noise absorbtion
9. Mains cable
10. Bucket
General view including accessories SW25KW
1. Handle
2. Cable holder
3. Main switch
5. Connector for hose
6. Latch for securing cover
7. Castors
8. Motor housing with noise absorbtion
a) Hose connector
of the unauthorised changes.
Read safety rules thoroughly!
•
Check the suitability of floor surfaces before using the machine.
•
Check that the wheels will not damage the surface of any plastic surfaces
especially in gymnasiums
Product Liability
The operator of the machine is strictly informed that the vacuum cleaner is
only to be used according to the operating instructions. Should the vacuum
cleaner not be operated properly, this happens at the own risc and own liability
of the operator. In such a case any form of guarantee is refused by the
manufactuer.
Sources of Danger
•
Care should be taken when driving the machine over thresholds or sills as
damage may occur to the wheels. Be very carefull near stairs that the unit
does not drop sown the steps.
•
When transporting in elevators, their safety regulations and precautions
are to be respected.
Authorised Service Staff
The vacuum cleaner may only be maintained by authorised specialists who
have full training on the maintenance of the vacuum cleaner.
First Operation
•
On delivery of this machine full training will normally be provided by
representative of the manufacturer.
•
Where this is not the case, the owner is responsible for training their staff.
a) Hose connector
b) Suction hose
c) Tubes (2)
d) Carpet/hardfloor tool
e) Dustfilter
f) Filterbasket with cloth filter
g) Paper bag
h) Upholstery tool
i) Insert with float
j) Crevice tool
9. Mains cable
10. Wheel
11. Tipp-trolley
12. Steel plate for nozzle
13. Handle for empting
16. Adjustring screw
g) dropery brush
GB