Remote Controller; Rm-Rk230; Main Elements And Features - JVC KD-NX901 Bedienungsanleitung

Remote controller —
Installing the lithium coin battery
(CR2025)
Using the remote controller:
• Aim the remote controller directly at the
remote sensor on the unit (see page 10). Make
sure there is no obstacle in between.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it
may explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
8

RM-RK230

Main elements and features

MONITOR CONTROL
DVD / RECEIVER CONTROL
SOURCE
BAND
2nd VOL
SHIFT
The remote controller can operate the playback
sources any time, even when you are using the
Navigation System.
MONITOR CONTROL
1 Monitor control buttons
• Controllable only if your monitor is one
of the JVC monitors—KV-MR9010 or
KV-MH6510.
DVD/RECEIVER CONTROL
2
(standby/on attenuator) button
• Turns on and off the power and also
attenuates the sound.
3 SOURCE button
• Selects the source.
4 BAND button
• Selects the FM/AM/DAB bands.
5 TOP M (menu) button*
• Displays the DVD disc menu.
MODE ASPECT MENU
ZOOM
ATT
+10
–100 +100
PRESET
/ TITLE
–10 / TITLE
DUAL OSD
1 2 3
DISC +
VOL
TOP M MENU
4 5 6
ENTER
7 8 9
DISC –
SETUP RETURN
0
RM-RK230
1