JVC KD-NX901 Bedienungsanleitung Seite 114

Receiver troubles
Symptoms
• "Push Reset" appears
on the display, and the
control panel movement is
freezed.
• Sound cannot be heard
from the speakers.
• The receiver does not
work at all.
• SSM automatic presetting
does not work.
• Static noise while listening
to the radio.
• Disc cannot be
recognised—"No Disc,"
"Loading Error," or "Eject
Error" flashes.
• "REGION CODE
ERROR!" appears on the
monitor.
• DVD-R/RW or CD-R/RW
cannot be played back.
• Tracks on the DVD-R/RW
or CD-R/RW cannot be
skipped.
• Disc can be neither played
back nor ejected.
• Disc sound and picture are
sometimes interrupted.
114
Causes
Something is blocking the
control panel movement.
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Signals are too weak.
The antenna is not connected
firmly.
The DVD/CD player may
have functioned incorrectly.
Disc with an incorrect
Region Code is inserted.
Disc is not finalized.
The DVD/CD player may
have functioned incorrectly
You are driving on rough
roads.
Disc is scratched.
Connections are incorrect.
Remedies
Remove the obstacle, then
reset the receiver (see page 2).
• If this does not work,
check if the installation has
been correctly done.
Adjust it to the optimum
level.
Check the cords and
connections.
Reset the receiver (see page
2).
Store stations manually.
Connect the antenna firmly.
Eject the disc forcibly (see
page 4).
Insert a disc with a proper
Region Code (see page 6).
• Insert a finalized disc.
• Finalize the disc with the
component which you used
for recording.
Eject the disc forcibly (see
page 2).
Stop playback while driving
on rough roads.
Change the disc.
Check the cords and
connections.