Audio Menu - JVC KD-NX901 Bedienungsanleitung

AUDIO menu

Item
DIGITAL AUDIO OUTPUT :
DOWN MIX :
D. RANGE COMPRESSION :
Select the signal format to be emitted through the DIGITAL OUT (Optical)
terminal on the rear.
• PCM ONLY : Select this when connecting an amplifier or a decoder
incompatible with Dolby Digital, DTS, and MPEG Audio, or connecting to a
recording device.
• DOLBY DIGITAL/PCM : Select this when connecting an amplifier or a
decoder compatible with Dolby Digital.
• STREAM/PCM : Select this when connecting an amplifier or a decoder
compatible with Dolby Digital, DTS, and MPEG Audio.
When playing back a multi-channel DVD disc, this setting affects the signals
reproduced through the LINE OUT jacks (and thought DIGITAL OUT
terminal when "PCM ONLY" is selected for "DIGITAL AUDIO OUTPUT.")
• DOLBY SURROUND : Select this when you want to enjoy multi-channel
surround audio by connecting an amplifier compatible with Dolby Surround
to this receiver.
• STEREO : Normally select this.
You can enjoy a powerful sound at low or middle volume levels while playing
a Dolby Digital software.
• AUTO : Select this to apply the effect to multi-channel encoded software
(excluding 1 channel and 2 channel software).
• ON : Select this to always use this function.
Contents
61