JVC KD-R203 Bedienungsanleitung Seite 14

Indications
TA VOL *
2
Traffic announcement
volume
P-SEARCH *
2
Programme search
DIMMER
Dimmer
TEL
Telephone muting
SCROLL *
4
Scroll
AUX ADJ
Auxiliary input level
adjustment
TAG DISP (for KD-R203)
Tag display
AMP GAIN
Amplifier gain control
IF BAND
Intermediate frequency
band
* 2 Only for FM Radio Data System stations.
*
3 Depends on the amplifier gain control.
*
4 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
14
Item Selectable settings, [reference page]
( : Initial)
VOL 00 [Initial: VOL 15]
– VOL 50
(or VOL 00
– VOL 30)* 3
• ON : Activates Programme Search, [9].
• OFF : Cancels.
• ON : Dims the display and button illumination.
• OFF : Cancels.
• MUTING 1/ : Select either one which mutes the sounds while using a cellular
MUTING 2 phone.
• OFF : Cancels.
• ONCE : Scrolls the displayed information once.
• AUTO : Repeats scrolling (at 5-second intervals).
• OFF : Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
A.ADJ 00 : Adjust the auxiliary input level to avoid the sudden increase of the
— A.ADJ 05 output level when changing the source from external component
connected to the AUX input jack on the control panel.
• TAG ON : Shows the Tag information while playing MP3/WMA tracks, [11].
• TAG OFF : Cancels.
• LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power of the speaker
is less than 50 W to prevent damaging the speaker.)
• HIGH PWR : VOL 00 – VOL 50
• AUTO : Increases the tuner selectivity to reduce interference noise between
close stations. (Stereo effect may be lost.)
• WIDE : Subject to the interference noise from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.