General Settings - Psm; Adjusting The Sound - JVC KD-R203 Bedienungsanleitung

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
BAS* 1 (bass), [–06 to +06]
Adjust the bass.
TRE* 1 (treble), [–06 to +06]
Adjust the treble.
FAD* 2 (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD* 1 (loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
VOL (volume), [00 to 50 or 00 to 30]*
Adjust the volume.
*
1 When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the currently
selected sound mode (c-EQ) including "USER."
*
2 If you are using a two-speaker system, set the fader
level to "00."
*
3 Depending on the amplifier gain control setting. (See
page 14 for details.)
12
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed on pages 13 and 14.
1
2
3
4
5
3
Select a PSM item.
Adjust the PSM item selected.
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
Finish the procedure.