Mixer Section - PIONEER DJ DDJ-RX Bedienungsanleitung

r SLIP button
Turns the slip mode on and off.
[SHIFT] + press:
Turns the vinyl mode on and off.
s SLIP REVERSE button
Plays the track in the reverse direction while the [SLIP REVERSE]
button is pressed, and resumes normal playback when the button is
released.
Slip reverse play is automatically canceled after 8 beats have elapsed
even if the [SLIP REVERSE] button is kept pressed. The playback
returns to normal after reverting to the background.
[SHIFT] + press:
Starts reverse playback. When the [SHIFT] and [SLIP REVERSE]
buttons are pressed again, reverse playback is canceled and normal
playback resumes.
t FX PANEL button
Displays the FX panel.
[SHIFT] + press:
Displays the sampler panel.
u QUANTIZE button
Turns the quantize function on.
For example, when the quantize function is turned on, the point is
automatically set to the nearest beat position when a hot cue is set.
! The resolution of the quantized beat can be selected in the
[Preferences] of [rekordbox].

Mixer section

1 2 1 2
3
c
5
4
d
4
5
e
f
6
7
8
g
9
a
1 FX 1 assign button
Turns the effect unit FX1 on/off.
2 FX 2 assign button
Turns the effect unit FX2 on/off.
3 TRIM control
Adjusts the output size.
4 EQ (HI, MID, LOW) controls
Boosts or cuts frequencies.
1 2 1 2
3
5
4
4
5
6
7
8
h i
9
j
a
b
5 Channel Level Indicator
Displays the sound level of the respective channels before passing
through the channel faders.
6 COLOR control
This changes the parameters of the SOUND COLOR FX of the differ-
ent channels.
7 Headphones CUE/MIC TALK OVER button
The sound of channels for which the headphones [CUE] button is
pressed is output to the headphones.
When the [INPUT SELECT] switch for Channel 3 or Channel 4 is set
to [MIC1] or [MIC2], the talk over function can be turned on/off using
the switch.
[SHIFT] + press:
The track's tempo can be set by tapping the button. (Tap function)
8 Headphones CUE button
The sound of channels for which the headphones [CUE] button is
pressed is output to the headphones.
[SHIFT] + press:
The track's tempo can be set by tapping the button. (Tap function)
9 Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[SHIFT] + move:
Use the channel fader start function.
a Crossfader Assign Switch
Assigns the channel output to the crossfader.
b Crossfader
Outputs the sound assigned with the crossfader assign switch.
[SHIFT] + move:
Uses the crossfader start function.
c MASTER LEVEL control
Adjusts the master sound level output.
d Master level indicator
Displays the master output's audio level.
e Booth monitor level control
Adjusts the level of audio signals output from the [BOOTH OUT]
terminal.
f SOUND COLOR FX buttons
Turns SOUND COLOR FX on and off.
g MASTER CUE button
Turns monitoring of the master output's sound on and off.
h SAMPLER SYNC button
Synchronizes the sampler deck's tempo with the master
deck's tempo.
! Only a sampler slot with the PLAY mode set to [Loop] synchro-
nizes the tempo with the master deck's tempo.
[SHIFT] + press:
Sets the sampler deck as the master for synchronization.
i SAMPLER CUE button
Turns monitoring of the sampler deck's sound on or off.
[SHIFT] + press:
Sets the sampler deck's tempo by tapping the button.
j SAMPLER VOLUME fader
Adjusts the sampler's overall sound level.
7
En