Switching On The Machine - Philips Senseo HD7853/60 Bedienungsanleitung

switching on the machine

1 Put the plug in an earthed wall socket.
2 Press the on/off button 3.
The light ring around the on/off button flashes slowly while the
,
water is heating up. Heating up takes approx. 90 seconds.
The coffee machine is ready for use when the light ring around the
,
on/off button lights up continuously.
If the light ring around the on/off button flashes rapidly, the water
,
reservoir does not contain enough water for brewing coffee.
Placing a pod holder
1 Move the lid lever upwards to release the lid.
2 Open the lid.
3 Place the appropriate pod holder in the machine.
Note: You can only brew 2 cups at the same time if you brew black coffee.
- Use the 1-cup pod holder if you want to make cappuccino or one cup
of SENSEO black coffee,
®
- Use the 2-cup pod holder if you want to make two cups of SENSEO
black coffee.
Placing one or two pods
Never put normal ground coffee or use torn pods in the SENSEO
machine, as this causes it to become blocked.
1 Place the SENSEO
pod holder, with the convex side pointing downwards.
coffee pod or pods properly in the centre of the
®
EnglisH
11
®
®