Filling The Water Reservoir; Switching On The Machine - Philips HD7854 Bedienungsanleitung

Filling the water reservoir

1 Fill the water reservoir with cold water to a level above the MIN
indication and place it back onto the machine.
The MIN indication indicates the minimum amount of water required for
brewing coffee. Always fill the water reservoir beyond the MIN level.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.

switching on the machine

1 Put the plug in an earthed wall socket.
2 Press the on/off button 3.
The light ring light flashes slowly while the water is heating up.
,
Heating up takes approx. 90 seconds.
The coffee machine is ready for use when the light ring around the
,
on/off button lights up continuously.
If the light ring around the on/off button flashes rapidly, the water
,
reservoir does not contain enough water for brewing coffee.
Placing a pod holder
1 Move the lid lever upwards to release the lid.
2 Open the lid.
3 Place the appropriate pod holder in the machine.
Note: You can only brew 2 cups at the same time if you brew SENSEO
coffee.
- Use the 1-cup pod holder q if you want to make cappuccino, latte
macchiato or caffè latte or one cup of SENSEO
EnglisH
11
black
®
black coffee,
®