Conrad H-racer Benutzerhandbuch Seite 15

Step 5
Now that the hydrogen storage cylinder (part C) is connected to the fuel cell (part E), position the
hydrogen storage cylinder onto the two mounts located directly above the rectangular opening on the
chassis.
Once the cylinder is positioned on the two mounts, press lightly until it fits onto the structure. To avoid
damage or breakage, be careful not to press the cylinder onto the mounts with too much force (see
5A & 5B to check the final appearance of the assembled chassis).
5A
Step 6
6A
Connect the red wire of the chassis (part A) to the red jack of the fuel cell (part E). (See 6A)
Connect the black wire of the chassis (part A) to the black jack of the fuel cell (part E). (See 6B)
Warning:
Make sure these connections are correct. Any other connection will destroy the
operation of the car and its fuel cell power system; also ensure the wires are not touching
the wheels.
25
5B
6B
Congratulations!
You have now assembled the fuel cell power system
of the world's smallest hydrogen car!
H-racer
Step 7 Time to close up the !
7A
Find the body of the car (part B) and place it above the chassis (see 7A & 7B).
7B
26