Wedge Interface Selection - Datalogic Gryphon D432 Referenzhandbuch

GRYPHON™ D432/D432E
4.2

WEDGE INTERFACE SELECTION

The Gryphon™ D432/D432E reader requires the Wedge interface cable.
To install and configure your reader with the Wedge interface, follow these
instructions:
1. Connect the cable to the Gryphon™ D432/D432E reader and to the PC as
shown in Figure 4.
Power up your PC.
2. Read the restore default parameter code below:
3. Read the Wedge IBM AT interface selection code:
12
Figure 4 – Wedge Connections
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Wedge – IBM AT
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALFAEHKK
AEONPJCJGIIJCMCEHPLLHLPPJK
AIFBJLBGMHPLNPDFHGDGFIBDOK
AAPHBAJJCGCOPJDIMBCEANODDK
AFKFBPPJPJCAALOIKIECIPIKLK
DDLDLDLDDLDLLLLDDDDDDLDLDL