Datalogic Gryphon D432 Referenzhandbuch Seite 138

GRYPHON™ D432/D432E
A HOST CONFIGURATION STRINGS
In this section we provide a description of how to modify the device configuration
using serial strings sent from the Host.
This method requires the RS232, USB-Com, USB Bulk or USB Generic HID
The device configuration can be changed by receiving commands from the Host
through the current interface. When this method is used, the programming sequence
format is the following:
Command
$+
Enter configuration environment
Example:
$+ GBB1
Each configuration parameter setting removes the condition previously active for that
parameter.
Configuring some configuration commands, such as those of
advanced formatting, through strings may result very complex. For this
reason they are not provided in the following tables but can be
configured by using VisualSetup configuration program or referring to
NOTE
the related section in chapter 5 of this manual.
126
interface.
$-
Character sequence in following tables
GBA1 $- CR
Exit and save new configuration
Beeper tone 1
Beeper low intensity
Enter configuration environment
CR
Carriage return character (0D Hex.)
Exit and Save configuration
Carriage return character (0D Hex.)