34
3. Save settings and exit Telnet via "9 = Save and exit"
4.
The parameters will be stored and the connection to the Ethernet card will be interrupted
During this time period no further entry may be done for aprox. 20 sec.
Lost connection to host
6.3 Terminal / controller settings
Be sure to have set the Network-Device to
Setup, and / or
Also refer to page 19, chapter 2.1 as well as to the documentations of the respective devices.
7. Technical data
Operating voltage
Temperature range
Current consumption with 10 BASE-T
Dimensions in mm (L x W X H)
Mounting and Connection Instructions - Ethernet-Interface 026840.29
Driver 1
is selected in the system data of
with 100 BASE-T
"Novar TR/AC-Ethernet"
TRS
time recording terminals!
4.5 V DC to 5.5 V DC
-5 °C to +45 °C
max. 170 mA
max. 240 mA
108 x 35 x 32
in
ACS-2 plus / 8
-