Honeywell 026840.29 Anleitung Seite 27

Mounting and Connection Instructions - Ethernet-Interface 026840.29
Do not change the Telnet configuration password!
Wrong or incorrect entries - especially a wrong Netmask
configuration - can cause the access to this ethernet interface no
longer being possible. In that case the interface must be sent back
to the manufactorer.
8.
Save settings and exit Telnet: "9 = Save and exit"
The parameter will be saved, the connection to the network interface will be interrupted.
9.
Within this time period (approx. 20 sec.) no entry may be done.
Lost connection to Host...
27