Din Protocol Configuration; Card Settings - Honeywell 026840.29 Anleitung

28
5. Configuration for DIN-Protocol
These settings are necessary for:
- TRS 8 / 15 / 35 with - SAP application software
- ACS-2 / 8 with non Novar / Esser-Software
- ACT
- External bus controller
5.1 Card settings (necessary for all devices above)
1. Start the setup access via "Telnet <IP-address> <space> 9999
Mounting and Connection Instructions - Ethernet-Interface 026840.29
- OEM-Server-Software
- non Novar / Esser-Software
IP-address <space> 9999