Honeywell 026840.29 Anleitung Seite 30

30
3. The parameters will be stored and the connection to the Ethernet card will be interrupted
During this time period no further entry may be done for aprox. 20 sec.
Lost connection to host
4. NetEdit settings*
(*= The following illustrations are made using NetEdit of MAfW V7. The layout of other versions,
especially of MultiAccess Lite and IQ MultiAccess may be slightly different to the examples displayed,
but the content is identical).
These settings are required for:
- MultiAccess for Windows
- IQ MultiAccess
- MultiAccess Lite
- MultiTime for Windows
5. Start NetEdit
6. Insert a COM-Port-Server
7. Enter a significant designation.
8. Enter the IP-address of the Ethernet-Interface.
Mounting and Connection Instructions - Ethernet-Interface 026840.29
on one workstation (see also NetEdit manual).
.