Die Schnittstelle kann anhand der folgenden Bestückungspläne identifiziert werden. Die RS 232-Schnittstelle und die Current-Loop-Schnittstelle können aufgrund ihrer Bestückungsart eindeutig zugeordnet werden. Bei den RS 485-Schnittstellen gibt es insgesamt acht verschiedene Typen, die sich in der Bestückung sehr ähnlich sehen.
Seite 3
Montage- Anschluss-Anleitung Schnittstellen RS485/232/Current Loop 4. Bestückungspläne Artikel 026690 Artikel 026840.01 RS 485-Schnittstelle RS 485-Schnittstelle 3-Draht, nicht potentialgetrennt 3-Draht, nicht potentialgetrennt grün grün Daten empfangen Daten senden 157.00-80-01/05 Jumperstellungen Artikel 026690 und 026840.01 J1, J2 gesteckt: Abschlusswiderstände gesetzt nicht gesteckt: Abschlusswiderstände nicht gesetzt...
Seite 8
Montage- Anschluss-Anleitung Schnittstellen RS485/232/Current Loop Hinweise für RS 485-Systeme. Bei gemischten RS 485-Systemen müssen folgende Einschränkungen beachtet werden: RS 485-Schnittstellen: Anmerkung: Die TRS 5 - Terminals Typ A Typ B besitzen eine interne RS 485-Schnittstelle. Art.-Nr. 026690 Art.-Nr. 026840.01 Diese entspricht Typ B.
Seite 9
Mounting and Connection Instructions RS 485- Interfaces RS 232- Interfaces Current-Loop- Interface Contents Page 1. General Interface Identification 3. Mounting Instructions 4. Assembly plans P55200-10-002-02 Subject to change without notice 2009-05-15...
But there are at least eight different types of RS 485-interfaces, which look very similar. The symbols below shall help to make the identification of the individual RS 485- interface easier.
Mounting and Conection Instructions RS485/232/Current Loop Interfaces 4. Assembly Plans Item no. 026690 Item no. 026840.01 RS 485-interface RS 485-interface 3-wire, not potential separated 3-wire, not potential separated green green = receive data = transmit data 157.00-80-01/05 Jumper settings for item no. 026690 and 026840.01...
Seite 12
Mounting and Conection Instructions RS485/232/Current Loop Interfaces Item no. 026840.02 Item no. 026691 RS 485-Interface RS 485-interface 3-wire, potential separated 3-wire, potential separated DC/DC-converter DC/DC-converter green green = receive data = transmit data 157.00-80-01/05 Jumper settings for item no. 026691 and 026840.02...
Seite 13
Mounting and Conection Instructions RS485/232/Current Loop Interfaces Item no. 026692 Item no. 026840.08 RS 485-interface RS 485-interface 5-wire, not potential separated 5-wire, not potential separated J7 J9 J8 green green = receive data = transmit data 157.00-80-01/05 Jumper settings for item no. 026692 and 026840.08...
Seite 14
Mounting and Conection Instructions RS485/232/Current Loop Interfaces Item no. 026693 Item no. 026840.09 RS 485-interface RS 485-interface 5-wire, potential separated 5-wire, potential separated J7 J9 J8 DC/DC-converter DC/DC-converter green green = receive data = transmit data 157.00-80-01/05 Jumper settings for item no. 026693 and 026840.09...
Seite 15
Mounting and Conection Instructions RS485/232/Current Loop Interfaces Item no. 026840.03 tem no. 026840.16 RS 232-interface Current-Loop-interface = receive data yellow = transmit data J1 J3 yellow Jumper settings for item no. 026840.03 Ext. Bus controller J1,J2,J3 position: 1-2 J1,J2,J3 position: 2-3 DFÜ...
Seite 16
Item no. 026693 Item no. 026840.09 Item no. 026817.03 Item no. 026817.02 The interface at the beginning and at the end of the RS 485 bus must be the same type. Beginning / end interface = type A: Type A...