Herunterladen Diese Seite drucken

Elimination Des Éléments Usés; Dépistage Des Défaillances - Conrad PAM-1280N Bedienungsanleitung

Werbung

• Make sure that all electrical connections, connecting leads between the unit and any
extension leads are in accordance with regulations and comply with the Operating
Instructions.
Do not allow the unit to run unattended.
Electrical equipment must be kept away from children. Therefore,
exercise particular care when operating equipment in the pres-
ence of children. Children may attempt to insert objects into the
unit. There is a danger of lethal electrical shock.
Never pour liquids over electrical equipment. There is an extreme
danger of fire or lethal electric shock. If this should, however
occur, immediately disconnect from the mains supply and con-
sult an expert.
• Do not leave the packaging material lying around. Plastic sheets, bags and poly-
styrene can be dangerous toys for children.
• In commercial establishments, observe the accident prevention regulations of the
Association of Industrial Professional Associations for Electrical Equipment and
Systems!
Never insert or withdraw the power plug with wet hands.
• Care must be taken to make sure that the protective conductor (yellow/green) is
broken neither in the power lead nor in any connected extension lead, nor in/on the
unit, because a broken protective conductor presents a lethal danger. Operating
without a connected protective conductor is not permitted.
• The unit is approved only for moisture-protected operation.
• Make sure that all electrical connections, electrical leads between the unit and any
extension leads are correct and in accordance with the operating instructions.
• Never withdraw the power plug from the socket by pulling on the lead. Withdraw it
from the power socket only by using the grips provided on the plug.
• When setting up or mounting the unit make sure that the mains lead is not trapped
or damaged by sharp edges.
30
tions chimiques susceptibles d'attaquer le boîtier ou de nuire au bon fonctionnement
de l'appareil.
Elimination des éléments usés
Si l'appareil est devenu inutilisable, il convient de procéder à son élimination confor-
mément aux prescriptions légales en vigueur.
Dépistage des défaillances
Vous avez fait l'acquisition d'un produit conçu sur la base des derniers développe-
ments techniques et bénéficiant d'une grande sécurité de fonctionnement.
Néanmoins, l'apparition de problèmes ou dysfonctionnements ne peut être totalement
exclue.
Vous trouverez ci-après un certain nombre de procédures vous permettant de vous
dépanner le cas échéant:
Respectez impérativement les consignes de sécurité !
Symptôme
Cause possible
Pas de courant après
Raccordement incorrect
actionnement de
de la fiche dans la prise
l'interrupteur Marche/Arrêt. de courant
Les VU-mètres ne
s'allument pas.
Le cordon secteur n'est
pas correctement enfiché
dans la douille au dos de
l'appareil
Fusible défectueux
Pas de son sur un canal.
Pas de signal d'entrée
Entrée non raccordée ou
raccordée de manière
erronée
Réglage incorrect du niveau Régler le niveau
d'entrée
Sortie non raccordée ou
raccordée de manière
erronée
Procédure
Brancher correctement
la fiche
Enficher correctement le
connecteur
Remplacer le fusible
Contrôler la source
Raccorder correctement
l'entrée
comme décrit
Raccorder la sortie
comme décrit
71

Werbung

Kapitel

loading

Diese Anleitung auch für:

Pam-1680n