Werbung
Clip 150
Dear customer,
Congratulations on having bought our Clip 150 !
!! Important !!
Before installing your Clip 150, please contact your telephone
provider to obtain the CLIP subscription (display caller).
Without this subscription, the Clip 150 does not work !
1. Buttons
1. Up button
2. Down button
1
3. Delete button
4. Call back button
2. Installation
- Open the battery cover underneath the unit and insert 3 AAA batteries or
connect the adaptor of the Clip 150. If you decide to use the adaptor,
connect one end of the adaptor cable with the electric socket and the other
end with the back of the Clip 150 (1).
- Plug one end of the phone cable into the telephone line wall socket and the
other end into the back of the Clip 150 "LINE" (2).
- Connect de phone cable of the telephone with the back of the Clip 150
"PHONE" (3).
1
When the battery low icon
appears on the display, make sure you
replace the battery or the memory numbers and settings will get lost.
3. Set the language
- Press and hold the Up button (1) for 5 seconds.
- Press the Up button (1) again to select the correct language = Dutch, French,
English or German.
- Press the Call Back button (4) to confirm.
4. Set the area Code
- Press the Up button (1) until the first digit appears on the display.
- Press the Down button (2) to move the cursor to the next digit.
- After entering your complete area code or in case it's not necessary to enter
one, press the Call Back button (4) to confirm.
5. Plus area code
The plus area code digits will be added to the incoming number and can be
used to add pabx prefix or operator prefix.To set the plus area code you have
to follow the same procedure as for the area code (point 4).
2
3
4
2
3
6. Date and time settings
After having set the plus area code, the date and the time can be pro-
grammed.
- Press the Up button (1) to enter the cor rect digit and the Down button (2)
to move the cursor to the next digit.
- Confirm the correct settings by pressing the Call Back button (4).
7. Display indications
a) OUT OF AREA :
The incoming call has been sent through by a
telephone provider that does not offer the
Caller ID service.
b) PRIVATE :
The caller's number can not be displayed
because he has restricted his number/name
from being sent to the receiving party.
c) ERROR :
An error has occurred in receiving the data information.
8. Caller ID list
The Caller ID list maintains the data of the last 90 incoming calls. Press the Up
button (1) to show the previous call on the display. Press the Down button (2)
and the display shows the next call. After the most recent call, the display
shows "END OF LIST".
8.1. Erasing information
If the list contains 90 numbers and a new call comes in, the oldest call will be
erased automatically and the new call will be stored.
a) To erase one stored number
- Press the Up (1) or Down (2) buttons to select the number you want to erase
- Press the Delete button (3) twice, the displayed number will be erased.
b) To erase the entire list
- Press and hold the Delete button (3) for more than 3 seconds, the entire list is
erased.
9. Caller ID dial
- Press the Up (1) or Down (2) buttons to select the number you wish to dial.
- Pick up the handset and press the Call Back button (4); the displayed number
will be dialled out automatically.
10. Warranty
Warranty :
1 year
Ask your dealer for your free swop warranty .
Attention :
Do not forget your purchase invoice when you retur n
the damaged device.
Clip 150
Werbung
