Operation With Walkie Talkie - Louis Z-Link 2.0 Bedienungsanleitung

Operation with Walkie Talkie

9. Operation with Walkie Talkie
To use a Bluetooth Walkie Talkie in combination with your Z-Link 2.0, you must
pair the two devices with one another. Once you have paired them successfully,
you doesn´t have to pair it again. The two devices will link automatically when
turning on.
Pairing to Walkie Talkie device
1. Press the on/off button of your Z-Link 2.0 for approx. five seconds to turn
on your Z-Link 2.0.
2. Then press shortly the "+" and "-" button at the same time until the red
and blue LEDs light up alternately. The device is now in pairing mode.
3. Please refer to pairing method in your Bluetooth Walkie Talkie user manual.
4. Once the pairing succeeds, the blue Z-link 2.0 LED flashes slowly.
Note:
If connecting takes longer than two minutes and the blue and red LEDs
continue to light up, it means a connection could not be established and you
will have to repeat steps 1-3.
Walkie Talkie operation
1. Sending
Please refer to PTT (Push 2 talk) operation method in your Bluetooth
Walkie Talkie user manual.
2. Answering
The Z-Link 2.0 automatically responds to incoming radio message.
40