Charge The Battery - Louis Z-Link 2.0 Bedienungsanleitung

2. Charge the battery

Note:
Before you use the Z-Link 2.0 system for the first time you must charge it for
at least 4 hours.
With a fully charged battery, the operating time is up to 12 hours; the stand-by
time is up to 300 hours (it depends on the usage condition and environment).
Please observe the correct procedure for charging:
1. Unpack the mains battery charger and the mini USB plug supplied with the
device and connect it to the Z-Link 2.0 mini USB port.
2. Once you have plugged the charger into a mains socket, the red Z-Link 2.0
control module LED lights up during charging. Once the battery is fully
charged, the blue LED lights up.
Note:
Please just use the set of battery charger with mini USB plug that is contained
in the Z-Link 2.0 pack.
Charge and change the battery
29