Louis Z-Link 2.0 Bedienungsanleitung Seite 37

Note:
If connecting takes longer than two minutes and the blue and red LEDs
continue to light up, it means a connection could not be established and you
will have to repeat steps 1-5.
Operating the AVRCP mode
1. Play/Pause
2. Skip to next track
3. Skip to previous track
4. Increase volume
5. Reduce volume
Note:
If the A2DP source is integrated into your mobile phone, use the Z-Link 2.0
to pair the devices, as described in point 6.1. If you wish to use the functions
referred to above, your device must be compatible with a Bluetooth AVRCP
profile.
Press and release the on/off button
Press and release the "+" button
Press and release the "-" button
Press and hold the "+" button
Press and hold the "-" button
37