Use Bluetooth Enabled Mobile Phones, Sat Nav Systems Or Mp3 (A2Dp) Players; Mobile Phone - Louis Z-Link 2.0 Bedienungsanleitung

Use
6. Use Bluetooth-enabled mobile phones, sat nav systems or MP3 (A2DP) players

6.1. Mobile phone

Before connecting to a mobile phone, please read the operating instructions
of your Bluetooth-enabled mobile phone in detail and check whether it supports an
HSP (headset profile) or HFP (hands-free profile) Bluetooth protocol.
1. First activate the pairing mode on your Z-Link 2.0 Bluetooth system:
While it is switched off, press the on/off button for approx. eight
seconds until the red and blue LEDs on the Z-Link 2.0 control unit
light up alternately.The device is now in pairing mode.
2. Now activate the Bluetooth function of your mobile phone.
3. When your mobile phone finds the device, the Z-Link 2.0 will appear as "Z-Link
2.0" in the device selection list of the mobile phone. Please select "Z-Link 2.0",
then insert the pin/password 0000 (four zeros) when you are requested to do
so in order to complete the pairing.
4. If the pairing has been successful, the Z-Link 2.0 LED lights up blue.
Note:
Once you have paired your mobile phone and Z-Link 2.0 successfully, you
do not have to repeat this process. The pairing is maintained.
Each time you switch the Z-Link 2.0 on, it connects to your Bluetooth mobile
phone automatically. If connecting takes longer than two minutes and
the blue and red LEDs continue to light up, it means a connection could not
be established and you will have to repeat steps 1-3.
Operating your mobile phone
1. Taking and ending a call
Your Z-Link 2.0 will alert you to an incoming call with an audible signal.
To receive or end a call, press and release the on/off button.
Note:
If you were listening to music before a phone call, at the end of the call the
Z-Link 2.0 system will switch back to the last track automatically.
34