Sat Nav System - Louis Z-Link 2.0 Bedienungsanleitung

2. Declining an incoming call
If you wish to decline an incoming call, press the on/off button for approx.
two seconds until you hear an audible signal. The system will decline the in-
coming call automatically.
3. Last number redial
If you wish to redial the last number, press and release the on/off button
twice consecutively.
4. Voice recognition
To activate the voice recognition function, press and release the on/off button
three times consecutively. Once voice recognition is activated, you will hear an
audible signal.
Note:
Obviously, your Bluetooth mobile phone must support this voice recognition
function.

6.2. Sat nav system

To use a Bluetooth sat nav system in combination with your Z-Link 2.0, you
must pair the two devices with one another. Once you have paired them successfully,
you will be able to receive the navigation instructions and, where applicable, the
music files (MP3 format) saved on your sat nav.
1. Switch on your sat nav.
2. While the device is switched off, press the on/off button of your Z-Link 2.0
for approx. eight seconds until the red and blue LEDs light up alternately.
The device is now in pairing mode.
3. Search for Bluetooth headsets on your sat nav.
4. The sat nav will list the Z-Link 2.0 as "Z-Link 2.0" in the list of recognised
devices. Select "Z-Link 2.0" and follow the instructions on your sat nav
until the pairing is complete.
5. If your sat nav requests a PIN or password, enter 0000 (four zeros).
6. If the pairing was successful, the blue Z-Link 2.0 LED flashes slowly.
Use
35