Minimum / Maximum Temperature Values; Setting Up The Basis Device - Conrad 67 21 82 Bedienungsanleitung

Minimum / Maximum Temperature Values

With this function you can determine whether the currently displayed measuring
values for the indoor and outdoor temperature rose or dropped, e.g. during your
absence or overnight.
Press "1" (MAX/MIN) once. The Display shows the maximum or minimum indoor
temperature value. Press the button again for the outdoor values. "INDOOR" or
"POOL TEMP" is displayed accordingly.
To delete the memory, press "4" (CLEAR) when the maximum or minimum value is
displayed.

Setting up the Basis Device

The housing has a standing foot on the rear that can be used to set up the basis
device, e.g. on a table.
Fold open the standing foot downwards and slide it slightly back into the housing
until it catches. When resetting, pull out the standing base again and fold it upwards.
The basis device can also be attached to a wall. For this, see attachment option "6"!
Determine the respective assembly site and mark the drilling position with a pencil!
Only use suitable screws and dowels for attachment!
27