Troubleshooting; Topcom Warranty - Topcom butler 4056C Bedienungsanleitung

Butler 4056/4056C
9 TROUBLE SHOOTING
Symptom
No display
No tone
The icon
flashes
Base or handset
do not ring
Tone is good, but
there is no
communication
Telephone does not
react to pressing
the keys
Flash (R) Key does
not work

10 TOPCOM WARRANTY

10.1 WARRANTY PERIOD
The Topcom units have a 24-month warranty period. The warranty period starts on the day
the new unit is purchased. The warranty on batteries is limited to 6 months after purchase.
Consumables or defects causing a negligible effect on operation or value of the equipment
are not covered.
The warranty has to be proven by presentation of the original purchase receipt, on which the
date of purchase and the unit-model are indicated.
10.2 WARRANTY HANDLING
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.
32
Possible cause
Batteries uncharged
Handset turned OFF
Telephone cord badly
connected
The line is occupied
by another handset
Handset out of range
The base has no power
supply
The handset is not
registered to the base
The ringing volume is
zero or low
The dialling mode is
wrong
Manipulation error
Keypad lock ON
Wrong Flash time
Solution
Check the position of the
batteries
Recharge the batteries
Turn ON the handset
Check the telephone
cord connection
Wait until the other handset
hangs up
Bring the handset closer to
the base
Check the mains connection
to the base
Register the handset to the
base
Adjust the ringing volume
Adjust the dialling mode
(pulse/tone)
Remove the batteries and
but them back in place
Turn OFF the Keypad Lock
Change the flash time
Butler 4056/4056C