Barring Outgoing Calls - Topcom butler 4056C Bedienungsanleitung

Butler 4056/4056C
4.26.1 Automatic selection
If you set the handset to 'automatic selection', the handset will automatically choose the
closest base unit in standby.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'SEARCHING' and the symbol
• A signal sounds once the handset has found a base unit.
4.26.2 Manual selection
If you set the handset to 'manual selection', the handset will only choose the base unit you
have set.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'BASE -' appears on the display.
• Enter the number of the base unit you want to select (1-4). Use the number keypad.
• Press the Programming key
• 'SEARCHING' and the symbol
• A signal sounds once the selected base unit has been found.
Notes:
• Before you can select a base unit, the base unit must be subscribed to the
handset first.
• If 'NOT SUB' appears on the display, this means the selected base unit does
not exist or the handset has not been subscribed.

4.27 BARRING OUTGOING CALLS

You can program the handsets to bar calls to certain telephone numbers so that for instance
'00' international numbers cannot be called. Up to 5 numbers (of max. 5 digits) can be barred.
To do this, do the following:
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'PIN' appears on the display.
• Enter your PIN code
• Press the Programming key
• 'BAR NUM ' appears on the display. You are in memory "1. _ _ _ _ _".
20
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BASE SEL' appears on the display.
.
repeatedly until 'AUTO' appears on the display.
.
appear on the display.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BASE SEL' appears on the display.
.
repeatedly until 'MANUAL' appears on the display.
.
.
appear on the display.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BARRING' appears on the display.
.
.
Butler 4056/4056C