Led Display; Base Key Functions; Outgoing Messages - Topcom butler 4056C Bedienungsanleitung

Butler 4056/4056C
8.1 SETTING THE INTERNAL VOICE PROMPT LANGUAGE
There are 3 voice prompt languages which can be selected by the switch at the bottom of the
base. Please set the switch at the desired language and press the play
language setting.

8.2. LED DISPLAY

The new message LED
flashes between each long pause indicates how many new calls have been recorded.
If the answering machine is switched off, the On-Off LED
MEMORY FULL-LED is turned on when the internal memory is full and no new messages
can be recorded.

8.3 BASE KEY FUNCTIONS

Note: - The &
Key
Press key briefly
1
1,2
Playback messages
2
3
4
speech +ringing
/
5
Play VIP-code
6
Current number of
7
Playback Time
8
9

8.4 OUTGOING MESSAGES

Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
• Outgoing message 1 for the answering function and possibility for callers to leave a
message.
• Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine.
8.4.1 Recording outgoing messages (OGM 1 or OGM 2)
• Press the / -key to select the OGM.
• A voice will playback the recorded OGM
26
/ will flash if new messages have been received; the number of
keys are at the bottom of the base
Stand-by mode
Play OGM
None
Set volume
Select OGM
ring tones
None
/
press key for 2 seconds
Record OGM
None
Record memo
None
Switch On-Off
Set VIP-code
Set numbers of
ring tones
Set date/time
Delete all messages
key to confirm the
does not light.
During message
play-back
Go to previous message
Pause
Skip message
Set volume
Stop
None
None
None
Delete message or
delete OGM
Butler 4056/4056C