Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Combination set DC 60012 Combo
4
17
14
18
11
9
Telephone base
2
3
8/9
3.1
16
Corded
handset
16
7
13
5
Handset cord
Handset
1
For wall mounting
remove the bottom and
place it on the other side
as shown above.
2
3
4
9
5
10
11
Charger
17
6
12
13
7
8
14
15
ENGLISH
Operating Instructions
Please read and observe the following information and keep the
operating manual nearby for future reference!
WARNING!
Safety information
Risk of explosion!
Only use the power adapter plugs supplied!
Only use batteries supplied or ones of the same type!
Always treat batteries with due care and attention and only use
batteries as described.
Never use standard and rechargeable batteries together. Never use
rechargeable batteries or standard batteries with different capacities or
charge statuses together. Never use standard or rechargeable batteries
which are damaged.
Risk of suffocation through small objects, packaging and protective foil!
Keep children away from the product and its packaging!
Risks to health and the environment from batteries!
Never open, damage or swallow batteries or allow them to pollute the
environment. They could contain toxic and ecologically harmful heavy
metals.
The telephone cannot be used to make calls in the event of a power
failure. Always keep a cord connected telephone which operates
without an external power supply available in case of emergency
situations.
Never use the telephone in the vicinity of medical equipment. Effects on
such equipment cannot be fully ruled out.
CAUTION!
Risk of hearing damage!
Avoid listening at full receiver volume.
ATTENTION!
Risk of property damage.
Prevent exposure to environmental influences, e.g. smoke, dust,
vibration, chemicals, moisture, heat and direct sunlight.
Only allow repairs to be completed by qualified personnel.
Contact your telephone network provider with regard to enabling
supplementary services.
INTENDED USE
The telephone is suitable for telephoning within a public telephone network
system. Any other use is considered unintended use. Observe all local
directives and regulations. Unauthorised modification or reconstruction is
not permitted. Under no circumstances open the device or complete any
repair work yourself.
PACKAGE CONTENTS
1 Telephone base, 1 Corded handset, 1 Handset cord, 2 power adapter
plug, 1 Handset, 1 Charger, 1 Telephone connection cable, 2 Rechargeab-
le batteries, 1 Operating instruction
OPERATING ELEMENTS
1 Earpiece
2 Display
3 Handset
Up: View Calls (CID), Increase volume (+)
Down: Phonebook, Decrease volume (-)
Navigating in the Menu (up / down)
Base
Up: View Calls (CID), Navigating in the Menu (up/down)
Left: Phonebook, Right: Show redial list
3 .1 Increase / Decrease speaker volume during a call
Increase / Decrease ringer volume in idle mode
4 Handset
OK, Press to confirm the operation
Base
OK, Press to confirm the operation, Press 3 sec. to set time and date
5 Handset
Stand-by mode: Pick up the handset / make call
Toggle between speakerphone and receiver mode
Base
Stand-by mode: Press for handsfree mode
Toggle between speakerphone and receiver mode
6 Open menu
7 Keylock (hold 2 sek.)
8
Microphone on / off
9 Handset
Back, Press to cancel a menu entry.
Press to backspace the digit(s) or character(s). Press and hold to
toggle between handset name and date/time in idle mode
Base
Return to previous level when in menu.
Delete the last input number or letter
10 Hang Up button, switch handset on / off (hold 2 sec.)
Press to exit the menu operation
11 R-key (Flash), Answer a second incomming call (provider dependent)
12 Redial Button, Press to enter redial list and dial the recent number
13 Insert dialling pause, Turn ringer on / off (hold 2 sek.)
14 INT, Press to make a intercom call or conference call
15 Microphone
16 Input handset cord
17 Socket power supply
18 Telephone jack
STARTING UP
Connecting the telephone line
Connect the telephone cable to the telephone line socket (18).
Connect the telephone cable to the telephone line wall socket.
Connect the handset cord to the base and handset (16).
Connecting the power adapter plug
Connect the cable of the power adapter plug to base and charger (17).
Connect the power adapter plug in a properly installed mains power
outlet
Insert the batteries according to the
diagram.
ATTENTION!
The batteries or telephone could
be damaged. Pay attention that the
batteries are inserted correctly.
Switch the telephone off before
removing the battery compartment
cover. Only switch it on again
when the battery compartment
cover has been replaced.
Charging the batteries
Charge the batteries for at least 12 hours when charging for the first
time and ensure they are subsequently discharged and charged fully.
This aids a long service life of the batteries.
Place the handset in the charger.
ICONS IN THE DISPLAY
On: The connection to the base station is good.
Flashing: The connection to the base station is lost.
On: Indicates the battery charge status full.
Flashing: Batteries are being charged.
On: A call is currently being made.
Flashing: A call has been received.
On: Calls in the caller list
Flashing: New calls in the caller list
The ringing tone has been switched off.
The alarm function is activated.
On: Speakerphone in use
Phonebook is activated
On: There are more menu options or informations
On: Keypad lock is on
On: The base microfone is off
DISPLAY AND NOTATION OF OPERATING SEQUENCES
Press the button depicted
2 sec. Press and hold down the button depicted for 2 seconds
Mark next menu point / entry with ▲▼ button
Enter digits or letters
[Example]
Texts in square brackets give instructions to select an
option or make an entry
Display of an icon (example)
Display of text (example)
Settings
BASE FUNCTIONS
USE THE PHONEBOOK
(Note: It can only be stored numbers.)
Create a phonebook number
2 sec.
[Enter number] OK
Editing a phonebook number
[Select number]
2 sec.
[
clear all digits or
clear last digits, edit number] OK
Delete a phonebook number
[Select number]
OK
Delete all phonebook numbers
2 sec. OK
Save a call list number (CID)
[Select number]
2 sec. OK
Save a redial number
[Select number]
2 sec. OK
Delete a redial / call list (CID) number
[Select number]
OK
or
HANDSET MENU STRUCTURE AND FUNCTIONS
PHONEBOOK
►NEW ENTRY ►LIST ►EDIT ENTRY ►DELETE ►DELETE ALL
►DIRECT MEM.
Example: Save Direct Access Memory:
(There are 2 direct access memories (Key 1 & 2) in the phonebook. A long
press on the keys in idle mode will automatically dial the stored phone
number.)
PHONEBOOK
OK
DIRECT MEM
MENU
OK
[Select Key 1 or Key 2] OK [No number]
MENU
[Enter name] OK
[Enter number] OK
OK
Edit Entry
Further processing in the Phonebook menu analogous example above.
PERSONAL SET
►HANDSET NAME ►HANDSET TONE ►LANGUAGE
►AUTO HANG-UP
Example: Auto Hang Up
(This function enables you to end a call automatically by simply placing the
handset on the base unit. By default, the Auto Hang up feature is ON.)
PERSONAL SET
OK
AUTO HANG UP
MENU
OK [Select on / off] OK
Further processing in the Personal Set menu analogous example above.
CLOCK & ALARM
►DATE / TIME ►SET FORMAT ►ALARM ►ALARM TONE
Example: Set Date / Time
OK
CLOCK & ALARM
DATE / TIME
MENU
OK
[Enter date] OK
[Enter time] OK
Further processing in the Clock&Alarm menu analogous example above.
ADVANCED SET
►CHANGE PIN ►REGISTRATION ►UNREGISTER ►RESET
►AUTO PREFIX ►RECALL TIME ►DIAL MODE ►FIRST RING
Example: Change Pin
ADVANCED SET
OK
CHANGE PIN
MENU
[Enter PIN 0000] OK
[Enter new PIN] OK
OK
Example: Reset
ADVANCED SET
OK
RESET
OK
MENU
[Confirm] OK (All your personal settings, call log and redial list
entries will be deleted)
Example: Registration
(Up to 4 handsets can be registered to one base unit. Included handset are
pre-registered.)
Press and hold INT button (14) on base for 5 sec. then press
ADVANCED SET
OK
REGISTRATION
MENU
OK
[Enter PIN 0000] OK
Example: Brokering / Transfer / Conference
(kann weg!!! Only possible with one or more registered handsets)
During an internal connection you have the following options:
Press
[The internal call will be ended and you can speak to the
external caller.]
Press
[The internal call is put on hold and you can speak to the
INT
external caller. Press
to toggle between intern and extern]
INT
Press
2 sec. [The 3-party conference is established]
INT
Press
[While connected to the internal subscriber - the external
call will be transferred to the other handset.]
Further processing in the Advanced Set menu analogous example above.
Service hotline
In the case of technical problems, contact our Service hotline. Switzerland:
Tel. 0900 00 1675 (national charges, Swisscom at time of going to print:
CHF 2.60/min). In the case of claims under the terms of guarantee, contact
your sales outlet.
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth. Do not use any
cleaning agents or solvents.
Guarantee
SWITEL equipment is produced and tested according to the latest produc-
tion methods. The implementation of carefully chosen materials and highly
developed technologies ensure trouble-free functioning and a long service
life. The terms of guarantee do not apply when a device malfunction was
caused by the mobile telecommunications network operator/provider. The
terms of guarantee do not apply to the batteries or power packs used in the
products. The period of guarantee is 24 months from the date of purchase.
All deficiencies related to material or manufacturing errors within the period
of guarantee will be redressed free of charge. Rights to claims under the
terms of guarantee are annulled following tampering by the purchaser
or third parties. Damage caused as the result of improper handling or
operation, normal wear and tear, incorrect positioning or storage, improper
connection or installation or Acts of God and other external influences
are excluded from the terms of guarantee. In the case of complaints, we
reserve the right to repair defective parts, replace them or replace the
entire device. Replaced parts or devices become our property. Rights
to compensation in the case of damage are excluded where there is no
evidence of intent or gross negligence by the manufacturer. If your device
does show signs of a defect within the period of guarantee, please contact
the sales outlet where you purchased the SWITEL device, producing the
purchase receipt as evidence. All claims under the terms of guarantee in
accordance with this agreement can only be asserted at the sales outlet.
No claims under the terms of guarantee can be asserted after a period of
two years from the date of purchase and hand-over of the product.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre). According to the laws on the disposal of electronic and
electrical devices, owners are obliged to dispose of old electronic
and electrical devices in a separate waste container. The adjacent
symbol indicates that the device must not be disposed of in normal
domestic waste!
You are legally obliged to dispose of power packs and batteries
at the point of sale or in the corresponding containers provided at
collection points by local public waste authorities. Disposal is free of
charge. The symbols indicate that the batteries must not be disposed
of in normal domestic waste and that they must be brought to collection
points provided by local public waste authorities. Packaging materials must
be disposed of according to local regulations.
Declaration of Conformity
This device fulfils the requirements stipulated in the Directive
1999/5/EC on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity. Conformi-
ty with the above mentioned directive is confirmed by the CE mark on the
device. To view the complete Declaration of Conformity, please refer to the
free download available on our web site www.switel.com.
Technical data (All rights reserved)
Feature
Value
DC 60012C Operating range: outdoor 300 m, indoor 50 m
W x H x D (Handset)
55 x 170 x 30 mm
Weight (Handset)
135 g (incl. battery)
Talking time
8 h
Standby
150 h
Charge time
15 h
Battery
2 x 400mAH NiMH 1.2V
Temperature range
-20 °C to 60 °C
W x H x D (Base)
170 x 75 x 200 mm
Weight (Base)
565 g (incl. Handset)
Power adaptor plug
Using the energy-efficient power adaptor model for base unit
S003IV0600050 (input AC 100-240V ~50-60Hz, output DC 6V/500mA)
and S003IV0600015 (input AC 100-240V ~50-60Hz, output 6V/150mA) for
charge cradle.
Werbung
