Auto Answer; Setting The Dialling Mode; Handset Name - Topcom Butler E300 Gebrauchsanweisung

5.12 Handset confirmation tones
During successfull or unsuccessfull operation the handset will beep. This beep can be
activated/deactivated:
Press Menu button
Use the Up or Down
button and select ON or OFF and confirm with
5.13 Key lock
When the keypad is locked, pressing any key will have no effect during standby (except
holding the key).
Press and hold the
and hold the key again to un-lock the keypad.
When there is an incoming call, you can still answer the call by pressing the OFF-hook button
. During the call, the keypad functions as normal. When the call is ended, the keypad
will be locked again.

5.14 Auto answer

Auto answer enables you to answer an incoming call by simply picking up the handset from
the charging cradle. You do not need to press a key to answer the call.
Press Menu button
Use the Up or Down
press .

5.15 Setting the dialling mode

There are two types of dialling mode:
DTMF/Tone dialling (the most common) (default)
Pulse dialling (for older installations)
To change the mode of dialling:
Press Menu button
Use the Up or Down
you want with the Up

5.16 Handset name

You can change the name that appears on the sceen (max. 10 characters) during idle stage:
Press Menu button
Use the Up or Down
name is shown Delete the character by the Mute
new name Press the Menu/OK button
Topcom Butler ME300/Twin/Triple/Quattro
Use the Down
button and select 'Tones'
key appears on the display and the keypad is locked
Use the Down
button and select 'Autoanswer'
Use the Down
button and select 'Dial Mode'
or Down key and select
Use the Down
button and select 'Handset Name'
Topcom Butler E300/Twin/Triple/Quattro
button to scroll to 'Sound' and press
Use the Up
.
button to scroll to 'Settings' and press
button to scroll to 'Settings' and press
Select 'Pulse' or 'TONE'
.
button to scroll to 'Display' and press
-key Use the keypad to enter the
to confirm.
or Down
Press
Select ON or OFF and
The currect handset
7