switel DC66x Bedienungsanleitung Seite 79

Charging the batteries
Before the handset is used for the first time, insert it in the base station /
charging station for at least 14 hours.
When the handset is properly inserted in the base station / charging station, you will
hear an acoustic signal. The handset warms up during the charging process. This is
normal and does not represent a risk. Do not charge the handset with charging units
from other manufacturers. The current battery charge status is indicated in the dis-
play:
Full
Setting the display language
Select a language (cf. Menu Structure"):
O > MT EINST > SPRACHE >... (O > HS SET > LANGUAGE >...)
The languages German, English, French and Italian are available for selection.
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 84 for the sequence of menu
option selections.
Automatic answering
If this function is activated, an incoming call is taken when the handset is removed from
the base/charging station. The automatic answering function is activated and deacti-
vated using the menu. Refer to Page 85 for the sequence of menu option selections.
Private branch exchanges
The information on Page 94 explains how to install your telephone in a private branch
exchange.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT
cordless telephones when in Standby mode when the handset is in the base
station.
In talk mode, radiation is reduced (depending on the distance between the
handset and base station).
Preparing the Telephone
69
Half empty Low Empty
79