C) Fm-Radio - Renkforce MS-60i Bedienungsanleitung

c) FM-radio

Switching to FM radio
• To switch to operating mode "FM", scroll through the main menu to the left or right with one of the two
arrow buttons C7 and C8, until "FM" is shown in the middle of the display. Then push the button C9 (OK)
again to open the function.
• Alternatively, you can push the button "MODE" C14 or A3 until the operating mode "FM" is displayed.
Set station:
You have three different options to set the stations.
• The first one is setting the station manually. You can use the two arrows C5 (up) and C6 (down) to manu-
ally set the receiver frequency in steps of 0.05 MHz.
• The second option would be a manual scan. You can start it with the button C7/A7 or C8/A8, depending
on the direction in which you want to let the radio scan. Once a station is found, the scan stops automat-
ically.
• The last option is the automatic scan. You can start it simply by pushing the C9 or A10 button. Here, all
stations found are saved on the programme slots automatically. There are 20 available for this:
Manually saving stations:
• To save a station that you have first found manually or by the scan, push and hold the star button C4 on
the remote control until the display changes and a disc icon is displayed.
• Use the C5 and C6 button to select one of the 20 memory slots and confirm with the button C9 or A10.
Selecting stored station:
There are two different options to select a saved station.
• The first one would be direct selection via the buttons 0 to 9 (D0-D9) on the remote control.
For example, if you want to select the station that is stored on slot 9, push the number button 9 (D9). After
a few seconds, the radio will switch to the station
For example, if you want to choose slot 15, tap the 1 on the remote control first, and then 5 immediately
after. The display then shows 15 and will switch to the station soon thereafter.
• The other option is selection directly at the device.
For this, push the button "PRESET".
Then you can scroll through the saved slots with the A10 dial.
To select a station, confirm by pushing the A10 button or the A9 button on the remote control.
Leaving the operating mode "FM"
• To leave FM radio mode again, push the C15 button to switch to the main menu.
• Alternatively, you may simply switch to a different operating mode with the button "MODE" C14/A3.
48