Setting Up; Connecting The Reader - Siemens AR6181-MS Betriebsanleitung

Setting up

3 Setting up
3.1

Connecting the reader

Terminal
Strip Description
X1
*) Terminal must not be used, risk of damage!
†
Note that the Wiegand signals D0 and D1 are associated with Clock and Data terminals differently from other
equipment.
10
Siemens Building Technologies
Fire Safety & Security Products
The reader is connected using a removable terminal connector (see: "Fig. 4
Reader board") in the top section of the housing which is slotted into the bottom
section of the housing.
Fig. 4 Reader board
RS485 Bus
1
*)
2
3
4 *)
5 *)
6 *)
7 *)
8 *)
9 RS485 - A
10 RS485 - B
Terminal allocation on the terminal board
Tab. 1
Function
AR6181-MS / AR6182-MS card reader
Clock/Data Interface
GND Power supply
+V Power supply 12-24V
Clock
Data
CLS
Wiegand Interface
Buzzer
†
D1
†
D0
LED green
LED red
*)
*)
02.2010