Removing The Filter Unit - Sharp XG-PH50X Serviceanleitung

13. Removing the Filter Unit

13-1. Disconnect all the connectors from the filter unit. Remove the four screws from the filter unit and then take it
out.
14. Removing the IR(Rear) Unit
14-1 Disconnect all the connectors from the power unit. Remove the six screws from the Plate and then take out
the Plate.
14-2. Remove the screw from the IR(Rear) unit and detach the IR(Rear) unit.
Power Unit
Chassis
14-1
Plate
PR3
PR2
PR1
PR3
PR2
PR1
Chassis
29
13-1
Filter Unit
IR(Rear) Unit
14-2
XG-PH50X
XG-PH50X-NL