Sharp XG-PH50X Serviceanleitung Seite 35

No. Adjusting point
11 adjustment of
videowhite
balance
12 Adjustment of
DTV white
balance
13 Factory settings
for reference / setting
OSD language
S3 English
S4 English
S5 Japanese
No. Adjusting point
14 Lens shift
position
15 Turn off the
power
Adjusting conditions
1. Feed the 50% gray pattern
signal (NTSC, burst signal)
to INPUT4.
2. Select the following group
and subject.
Group : DLPV
Subjects: V-R1-GAIN (Red)
V-B1-GAIN (Blue)
1. Feed the 50% gray pattern
signal (480i, color differ-
ence signal) to INPUT1.
2. Select the following group
and subject.
Group : DLPV
Subjects : C-R1-GAIN(Red)
C-B1-GAIN(Blue)
1. Select the following group
and subject.
Group : SSS
Subject : S4 (North America)
S3 (Europe/Asia/
Australia)
S5 (Japan)
Video-set up level
0IRE
7.5IRE
0IRE
Adjusting conditions
Adjusting procedure
1. Adjust V-R1-GAIN and V-B1-GAIN so that x-value
should be 290 ± 3 and y-value should be 310 ± 3.
1. Adjust C-R1-GAIN and C-B1-GAIN so that x-value
should be 290 ± 3 and y-value should be 310 ± 3.
1. Make the following settings.
PH50XU : S4 (to north America)
PH50X : S5 (to Japan)
Other : S3 (to Europe/Asia/Australia)
Adjusting procedure
1. Move lens shift position
Vertical : Top position
Horizontal: Center
35
XG-PH50X
XG-PH50X-NL