Sharp XG-PH50X Serviceanleitung Seite 26

XG-PH50X
XG-PH50X-NL
10. Removing the Optical Engine
10-1. Remove the screw from the rod duct and then detach the rod duct.
10-2. Remove the screw from the lamp channel top.
10-3. Unhook the front of the lamp channel top and take it out.
10-4. Slide the bimetal cover and detach it out.
10-5. Release the cable tie and then disconnect the left speaker connector. Remove the six screws from the
optical engine and then lift the optical engine out of position.
Rod Duct
10-3
10-5
10-4
26
10-1
10-2
Lamp Channel Top
Bimetal Cover
10-5
Optical Engine