Searching For And Editing Stations - Clatronic dvbt 704 twin Bedienungsanleitung

CL_BDA_DVB_T704_GB_ka1.qxd

Searching for and editing stations

Select the "Channel Search" sub-menu to quickly search for a
station or change the characteristics of stored stations.
If the installation lock is activated (see page 99), you will be
prompted to enter the password (PIN code). (The device PIN
code is set to 0000 by default.)
The individual settings for a station can be carried out in this menu.
Select the desired option with the "CH
keys.
Change the setting with the "VOL
The following settings are available:
Channel
Here you can set the desired channel range.
Frequenz KHz
Specify the precise frequency of the station.
Bandwidth
Select the desired bandwidth.
Mode
Set the carrier signal here.
Guard Interval
Set the interval for frequency modulation here.
FEC Rate
Set the error code here.
Modulation
Set modulation here.
26.01.2006
The following settings are already pre-set in the case of
the automatic station search (see "Station Search",
Page 98). Change these settings only if you know the
precise values.
10:48 Uhr Seite 97
Carrying out basic settings
" and "CH
" and "VOL
" arrow
" arrow keys.
97