CL_BDA_DVB_T704_GB_ka1.qxd
Commissioning
Commissioning
Insert the mains plug of the receiver in a regulation power socket
with PE for 230 V, 50 Hz.
Turn the power switch on the back of the device to "ON".
The device is set to standby mode.
Insert the connected devices' mains plug into the mains socket
and switch these on.
Switch on the AV channel on the TV set.
Initial Installation
The first time the device is switched on the start window of the
installation assistant appears. With the help of this installation assi-
stant you can easily carry out the most important settings of the
receiver.
Use the "VOL
option. Confirm your selection with the "OK" button.
After the installation assistant has completed the station finding
procedure (100%), press the "OK" button to return to normal
operation.
Remote control
The remote control requires two Micro LR 03/AAA 1.5 V batteries.
Open the battery compartment.
88
26.01.2006
Please refer to your TV set's operating instructions for
information on how to switch the "AV" channel on.
" or "VOL
10:48 Uhr
Seite 88
" arrow keys to select the desired